Complete exhaust with racing valve CES3 decatalyzed Capristo Porsche 987 Boxster Cayman MK2 2009-2012

The complete high-performance CAPRISTO system aims to be a balanced increase between power, driveability and sound quality, without obviously forgetting a substantial weight loss. All of this is delivered while maintaining the CAPRISTO philosophy, the best of both worlds, which offers the ability to produce an aggressive exhaust note under acceleration and a more subdued sound for city driving. This system has been dyno tested and shown an improvement of over 25 HP.

This feature is possible by using vacuum operated valve flaps that open and close depending on driving conditions and driver input. At lower engine speeds and during cruise operation the valves are closed and produce a deeper exhaust note. With the throttle fully open, the valves open releasing the full symphony of the engine.

The exhaust valves are controlled by back pressure and via the included Valve ControllerRemote which allows you to control the permanent opening of the flaps, without the serial control being able to intervene. When the exhaust valve system is closed again with the use of the remote control, the series control unit will resume control of the exhaust valves again. This allows for precise exhaust control based on the driver's personal tastes and tolerance.

CAPRISTO exhaust systems are designed and manufactured using advanced 3D laser scanning, engineering CAD, digital prototyping and CNC bending/milling in our factory in Germany. Each system is made of high quality T309 (1.4828) stainless steel and hand polished to a mirror finish. After extensive research, this specific alloy was chosen for its sonic resonance, low weight and durability properties which are close to the properties of Inconel (used in F1).

PERFORMANCE MANIFOLDS:

Manifolds use a custom design and modified tube routing compared to stock manifolds to maximize exhaust flow.

< /p>

IMPORTANT

*The exhaust system is designed to be installed directly into existing OEM mounting points*

*Recommended for off-road and track use only*

Replacing the OEM catalytic converter may trigger a Check Engine Light (CEL) .

To disable a recurring CEL you will need to tune the ECU or use 02 sensor extensions.